Product Details
Brief:
Also known as plastic additives plastic additives, some compound polymer (synthetic resin) were to type machining to improve its workability or to improve their performance and the lack of resin must be added. For example, to type in order to reduce the temperature of polyvinyl chloride resin, the article added soft plasticizer; and as for the production of light quality, vibration, heat insulation, sound insulation and foam blowing agent to be added; some plastics thermal decomposition temperature and the processing temperature is very close to the type, without the addition of heat stabilizers can not be a type. Thus, plastics additives occupy a particularly important place in a type of plastic processing.
Plastic additives YPL Pressure spray drier:
Brief
Pressure spray drying granulation machine is used by means of a pressure atomizer diaphragm pressure solution or slurry material atomized into fine droplets, the surface area increased significantly, by heat exchange with the hot air adequately to the rapid drying (ten second to tens of seconds), to thereby obtain fine particles or powder product equipment.
Technical parameters
| Model |
unit |
50 |
100 |
150 |
200 |
300 |
500 |
1000 |
| Water evaporation |
kg / h |
50 |
100 |
150 |
200 |
300 |
500 |
1000 |
| Dimensions (Ø * H) |
mm |
1600 *
8900 |
2000 *
11500 |
2400 *
13,500 |
2800 *
14800 |
3200 *
15400 |
3800 *
18800 |
4600 *
22500 |
| High-pressure pump pressure |
MPa |
0.5-8 |
| power |
KW |
8.5 |
14 |
22 |
24 |
30 |
82 |
30 |
| Inlet air temperature |
℃ |
300-350 |
| Material Recovery |
% |
> 97 |
| Electric heating |
KW |
75 |
120 |
150 |
At temperatures below 200, particularly in real terms. |
| Electric heating steam |
MPa + KW |
0.5 + 54 |
0.6 + 90 |
0.6 + 108 |
| Hot blast stove |
Kcal / h |
100 000 |
150,000 |
200 000 |
300,000 |
400,000 |
500 000 |
1.2 million |
1, the air filter
2, adjusting damper
3, blower
4, Heat exchanger
5, spray gun
6, the drying tower
7, mixing tank
8, the filter
9, feed pump
10, surge tank |
11, the discharge valve
12, to close the barrel
13, cyclone
14, bag filter
15, unloader
16, adjusting damper
17, exhaust fan
18, circulating pump
19, ESP
20, water tank
21. The screening device |
1, the air filter
2, adjusting damper
3, blower
4, Heat exchanger
5, spray gun
6, the drying tower
7, mixing tank
8, the filter
9, feed pump |
10, surge tank
11, the discharge valve
12, to close the barrel
13, cyclone
14, bag filter
15, unloader
16, adjusting damper
17, exhaust fan
18, circulating pump
19, ESP |
|
中文版 |
